Premium Quality Car Detailing Product

Nanolex Si3D MAX Ceramic Coating

Brand: Nanolex
4.00 out of 5 based on 1 customer rating
(1 customer review )

 9,239

Nanolex Si3D MAX forms a very thick, cross-linked polysilazane matrix to provide maximum protection combined with maximum easy to clean properties.

The three-dimensional matrix forms a highly chemical and abrasion resistant layer that is highly hydrophobic at the same time.

The thick protective coat generated by applying Si3D MAX is suitable for painted surfaces, rims and hard plastic parts.

Secure Payment Link - Car Detailing Products

Nanolex Si3D MAX forms a very thick, crosslinked polysilazane matrix to provide maximum protection combined with maximum easy to clean properties.

The three-dimensional matrix forms a highly chemical and abrasion resistant layer that is highly hydrophobic at the same time.

Due to the high layer thickness the depth of color is taken to the maximum as well.

Si3D MAX is formulated VOC-free using sophisticated state of the art carriers.

Incorporated advanced additives allow to reach the full potential with one single layer which is very easy and safe to apply on all types of paint.

The thick protective coat generated by applying Si3D MAX is suitable for painted surfaces, rims and hard plastic parts.

Si3D MAX was developed, tested and product in Germany.

Features & Benefits:

  • Thick layer for maximum protection
  • Easy to clean effect
  • Maximum Hydrophobicity
  • High gloss finish

 

How to use

 Processing temperature: 5-30°C – Avoid direct sunlight and/or high air humidity.

  1. Nanolex Si3D MAX can be applied directly to all clear-coated (lacquered) surfaces. The lacquer surface must be dry and free of any contamination or dust. We strongly recommend to use Nanolex EX directly before the application to make sure that all oils/fillers and other dirt are removed completely from the surface. Use Nanolex microfiber towels and turn or exchange cloth frequently during cleaning/polishing.
  2. If the car was machine polished before the application it is absolutely necessary to remove any (mostly invisible) fillers and oils – if those are not removed a white or grey hazing will appear on the paint once Si3D MAX was applied. The paint sealant layer itself is too thin to be visible and can easily buffed off – only fillers and oils will become visible. We recommend to wash the car with Nanolex PreWash after the paint was machine polished to safely remove the majority of the contamination.
  3. Spread 5-10 drops/m2 of Nanolex Si3D MAX on a microfiber applicator pad and apply it sparingly by rubbing in with light pressure in criss-cross motions. Remove the coating residue with a soft microfiber cloth after a maximum of 3 minutes. There is no pressure necessary to remove it completely.
  4. Let Nanolex Si3D MAX cure on the surface for at least 12 hours (at ambient temperature, assuming 20°C) before the first water contact. Do not wash the car within the first 72 hours.

Curing time depending on temperature: @50°C: 3-4 hours @80°C: 2 hours


1 review for Nanolex Si3D MAX Ceramic Coating

4.00 out of 5 stars

5
0
4
1
3
0
2
0
1
0
  1. Reviewer profile image
    4 out of 5

    cozicarskathua (verified owner)

Only logged in customers who have purchased this product may write a review.

Shipping

You may also like…

  • Suede ceramic coating applicator cloth
     538 4,112
  • Gyeon CancoatPro